In order to be able to use our self-serve system, you must apply through the Permit Office during regular business hours.
Once approved as a self issuer, you can be added to our online issuing system to view and print your permits as well as issue most of your own permits. A video with instructions on how to use the system can be found at the end of this page.
Self issue maximum permit limits:
- 7.30 m wide
- 45.0 m long
- 5.18 m high
- maximum axle group loading 27,000 kg
- maximum gross vehicle weight 70,000 kg
Loads where the axle group weight exceeds 27,000 kg or the gross weight exceeds 70,000 kg will require approval by Ministry of Highways and Infrastructure bridge engineers. SGI will forward the request for approval to the engineers. Engineer approvals are only completed during regular business hours and may prolong the permit approval process.
Minimum self issuer requirements:
- a high speed internet connection
- Internet Explorer is required (other browsers are not supported)
- Windows 2000 Service Pack 4 or better
- 512 mb of memory
- Adobe Acrobat reader
- Cookies must be enabled
- Screen resolution set to 1024 x 768
For more information on becoming a self issuer contact the SGI Permit Office at 306-775-6969.
Permit Application Training Video
SGI Permit Office
306-775-6969 (in Regina/outside Saskatchewan)
1-800-667-7575 (in Saskatchewan)